2026-10-23T14:20:13

Water Pump Factories in Indonesia: Shimizu, Panasonic, Ebara Addresses

Water pump factories in Indonesia found on official sites and public sources as of 23 October 2026: the Shimizu factory in Balaraja, Tangerang; PT Panasonic Manufacturing Indonesia (PMI) in Pasar Rebo, East Jakarta, which according to Panasonic makes Panasonic, SANYO and KDK brand pumps; PT Ebara Indonesia in Cimanggis, Depok; and the Grundfos assembly plant in Cakung, East Jakarta. The list also carries the Shimizu water pump factory address (Kebon Jeruk office), the Panasonic water pump factory address (Jl. Raya Bogor Km 29) and the marketing offices of Sanyo (Setrindo Prima), Wasser (Aditya Sarana Graha) and CRI. The Shimizu factory street address is not written on the site, and we could not find the Wasser and CRI factory locations; these gaps are marked in the table.

Addresses of water pump factories in Indonesia

Company / brand	Address (per source)	Phone / email (per source)	Remarks	Source
Shimizu	Balaraja, Tangerang, Banten (street address not written)	—	Factory. Site: factory in Cikupa since 1990; since 2002 a new factory on 1.5 hectares in Balaraja; more than 20 pump models (site claim)	Shimizu
Shimizu	Sastra Graha 6th floor, Jl. Raya Pejuangan No. 21, Kebon Jeruk, Jakarta 11530	(62-21) 5331646; info@shimizupump.co.id	Office, not a factory; this is the contact address on the site	Shimizu
PT Panasonic Manufacturing Indonesia (PMI)	Jl. Raya Bogor Km. 29, Pekayon, Pasar Rebo, Jakarta Timur 13710	Not found on the pages we read	Factory. Panasonic press release: PMI is the only global factory for Panasonic, SANYO and KDK pumps; cumulative production of 30 million units from 1988 to April 2019	Panasonic
Sanyo – PT Setrindo Prima	Jl. Danau Sunter Barat Blok A3 No. 38-39, Jakarta 14350	(021) 645 0381	Marketing office. Sanyo Indonesia site: factory opened in 1990 as PT Sanyo Industries Indonesia and marketed through Setrindo Prima; the relationship with PMI is not explained	Sanyo Indonesia
Wasser – PT Aditya Sarana Graha	Jl. Mampang Prapatan No. 97, Jakarta Selatan	CS@aditya.co.id	Head office. The site says Wasser Pump was launched as the third brand; its production location is not stated	Aditya Sarana Graha
PT Ebara Indonesia	Jl. Raya Jakarta-Bogor Km. 32, Curug, Cimanggis, Depok, West Java 16453	(62-21) 874 0852-53	Site: head office and factory; land of 51,000 m² (Facilities page)	Ebara Indonesia
PT Grundfos Pompa	Jl. Rawa Sumur III, Pulogadung Industrial Estate Blok 3/CC-1, Cakung, East Jakarta 13930	Not found	Submersible pump assembly plant. Address from a business directory (we could not open the official Grundfos site); inaugurated 14 November 2024, US$2 million investment, 29% TKDN (news)	Infoisinfo
CRI Fluid Systems	Marunda Center Blok C No. 10 (office) and Blok B1 No. 18 (warehouse), Jl. Marunda Makmur, Segaramakmur, Tarumajaya, Bekasi Regency 17211	021-8899 7558 / 021-8899 8118; warehouse 021-8899 8222	The Indonesia page lists a Boutique Office and a Warehouse; the factory location is not stated, and the 50 Hz page writes Blok B No. 23	CRI Fluid Systems

Addresses and remarks come from company websites, press releases and news as of 23 October 2026 and may change; confirm before visiting. Data gaps: the street address of the Shimizu factory in Balaraja is not written (only the Kebon Jeruk office); we did not find a PMI phone number on the pages read; Sanyo Indonesia writes a 1990 factory and marketing through Setrindo Prima while Panasonic says SANYO brand production at PMI began in 2011, and how the two statements relate is not explained; the Gobel Group lists PMI at Km 29 and another location at Km 27 for a different entity and we only use Km 29; the production sites of Wasser and CRI are not stated; the Grundfos address comes from a business directory, not from the official Grundfos site, which we could not open; the CRI Indonesia page (Blok C No. 10 and warehouse Blok B1 No. 18) and the 50 Hz page (Blok B No. 23) disagree. All capacity or model claims are company claims that we did not verify. Other brands (for example Aquamax, Dab, Wilo, Lakoni) were not traced to production addresses.

Regional map (homeX count from the table)

Of the 8 rows in the table, four are listed production or assembly sites: Shimizu in Balaraja (Tangerang), PMI in Pasar Rebo (East Jakarta), Ebara in Cimanggis (Depok) and Grundfos in Cakung (East Jakarta). The other four are offices, marketing or a warehouse: Shimizu in Kebon Jeruk, Setrindo Prima in Sunter, Aditya Sarana Graha in Mampang and CRI in Tarumajaya, Bekasi. This is a count over our list and not a census of national pump factories.

Grundfos Jakarta: submersible pump assembly plant

Indonesia Business Post reported that Grundfos inaugurated a US$2 million submersible pump factory in Jakarta on Thursday, 14 November 2024, with a large-scale assembly and testing line; previously Grundfos submersible pumps were assembled by PT Tehnik Optima Pompa in Semarang. Water & Wastewater Asia reported that the Ministry of Industry presented a TKDN certificate showing 29% local content. The Cakung address in the table comes from a business directory and should be confirmed with Grundfos.

How to use this list when buying or servicing a pump

Pump factories generally do not sell at retail: for a household pump, ask a building store or the brand service center. Shimizu says on its site that service centers are available across Indonesia (site claim; we did not audit the city list). For Shimizu, Sanyo and Aquamax pump prices, read our water pump price article; for your own water source, filters and tanks, see the related articles below.

Buyer tips

Confirm the address and hours by official phone before visiting; marketing offices are not factories.
Keep the pump serial number and warranty card; ask about spare parts and the nearest service center.
Ask for a written quotation with a clear type, power and head.
Check TKDN, SNI or other certificates directly with the manufacturer; we did not verify them.

Request a water pump factories in Indonesia quote for your project

homeX can compare several brands at once and prepare a written quote for projects, renovations or shop stock. Send your needs (brand, size, quantity, location) via WhatsApp +62 821 1818 998, or visit the homeX showroom: Priskilla Tower, 6th floor, Jl. Atang Sanjaya No.21, Benda, Kota Tangerang, Banten 15125. Visit the homeX Showroom.

Disclaimer: prices change without notice and differ by store, city, pack size, grade and promotion. Data as of 23 October 2026; always confirm with the seller before buying.

FAQ

Where is the Shimizu pump factory? The Shimizu site writes a factory in Balaraja, Tangerang since 2002 (previously Cikupa since 1990) without a street address; its contact is Sastra Graha 6th floor, Jl. Raya Pejuangan No. 21, Kebon Jeruk, Jakarta 11530, phone (62-21) 5331646.

Where is the Panasonic water pump factory? Panasonic and KDK list PT Panasonic Manufacturing Indonesia at Jl. Raya Bogor Km. 29, Pekayon, Pasar Rebo, East Jakarta 13710; a Panasonic press release says PMI makes Panasonic, SANYO and KDK pumps.

Where is the Ebara Indonesia factory? The Ebara site writes the head office and factory at Jl. Raya Jakarta-Bogor Km. 32, Curug, Cimanggis, Depok, West Java 16453, phone (62-21) 874 0852-53.