2026-10-23T17:39:55

Switch and MCB Factories in Indonesia 2026: Broco, Schneider, ABB Addresses

印尼开关与 MCB 工厂 2026：Broco、Schneider、ABB 地址

Switch and MCB factories in Indonesia listed in the member profiles of the Indonesian Association of Electrical Equipment Producers (APPI), accessed 23 October 2026, include PT Broco Mutiara Electrical Industry in Jatiuwung, Tangerang (switches, sockets, MCBs and MCB boxes), PT Schneider Indonesia with an MCB plant at Batamindo, Batam, PT ABB Sakti Industri in Tangerang and MM2100 Cibitung, PT Mega Cipta Bangsa in Bantar Gebang, Bekasi, and PT Sinarindo Wiranusa Elektrik in Bantar Gebang. For electrical installation equipment manufacturers Indonesia, the APPI profiles give annual capacities as filled in by the members: Broco 1 million MCB units, ABB 10 million MCB pcs, Mega Cipta Bangsa 5 million poles. For an MCB factory address Indonesia, bear in mind that the APPI profiles are undated (the pages carry a 2021 copyright) and the capacity figures cannot be compared directly because the units differ.

Switch and MCB factories in Indonesia: addresses and capacity per APPI profiles

Company / brand	Factory address (per APPI)	Products and capacity (member-filled)	Note	Source
PT Broco Mutiara Electrical Industry (BROCO)	Jl. Siliwangi KM. 0,5, Desa Keroncong, Kec. Jatiuwung, Tangerang 15134	Max per year: switches 4.8 million units; sockets 4.8 million; MCB types C and CL 1 million; MCB and fuse boxes 1 million; lamp holders 5 million; plugs 4 million; other accessories 3 million	Operating since 28 Feb 1986; 657 staff per APPI, while the same page says the group has 4 plants and over 4000 employees (different figures, not explained); certifications listed: SNI, LMK, VDE, CE, PSB	APPI: Broco
PT Schneider Indonesia (Schneider Electric, Clipsal)	MCB: Batamindo Industrial Estate, Jl. Beringin Lot 4, Muka Kuning, BIP-Batam; MV and LV panels: EJIP Plot 4B No. 1-2, Lemahabang, Bekasi 17550	MV and LV panel capacity max 27,600 units per year; MCB capacity not stated	755 staff, operating since 1994 (APPI). The history on the same page mentions a new MCB plant in Cibitung (2011), but the MCB factory address given is Batam; we cannot confirm which applies	APPI: Schneider
PT ABB Sakti Industri (ABB)	Factory 1: Jl. Raya Gajah Tunggal KM. 1, Tangerang; factory 2: MM2100 Industrial Estate, Jl. Halmahera Blok DD-11, Cikarang Barat, Cibitung 17520, Bekasi	Low-voltage MCB 10,000,000 pcs; medium-voltage 4,000 panels	800 staff, operating since 1986 (APPI); design standards IEC, NEMA, ANSI, SPLN; APPI does not say which plant makes the MCBs	APPI: ABB
PT Mega Cipta Bangsa (merek Elektro)	Jl. Pangkalan III No. 35, Cikiwul, Bantar Gebang, Bekasi 17152	MCB, max capacity 5 million poles per year (written "5 Mpoles")	94 staff; operating since 20 Jan 2012; ISO 9001:2008 (TUV SUD); design standard SPLN; phone 021-82648946	APPI: Mega Cipta Bangsa
PT Sinarindo Wiranusa Elektrik (SINARINDO)	Jl. Tengah Pangkalan 1A, Bantar Gebang Selatan RT 001 RW 010 No. 49, Bantar Gebang, Kota Bekasi 17151	"Installation accessories" max capacity 110 million per year; the history text mentions products for PLN (kWh meters, MCBs, fuse cut-outs, connectors) and a capacity of 12 million sets per year	181 staff; since 1989; ISO 9001:2015 (LMK); the two capacity figures on the same page differ and are not explained; focus on PLN needs, not retail for homes	APPI: Sinarindo

All data is quoted from the APPI member profiles (appi-electric.co.id) accessed on 23 October 2026; the profiles are undated, filled in by the members themselves and the pages carry a 2021 copyright, so addresses, capacities and headcount may have changed. None was verified on location or on each company site. Capacities cannot be compared directly (units, pcs, poles and "sets"); the APPI profiles also do not say whether an address makes household switches or only industrial products. Other companies in the APPI list (switchboards, transformers, cables) are not included because they are not home installation equipment; this is not a complete list. Certifications (SNI, LMK, VDE) are as filled in by the members; check product certificates before buying for a project. Store prices are covered in our switch and MCB price article.

How to read factory capacity: units, pcs, poles and sets

Broco writes 1 million MCB units, ABB 10 million pcs, Mega Cipta Bangsa 5 million poles and Sinarindo 110 million for "installation accessories". One MCB can have 1 to 4 poles, so 5 million poles is not 5 million MCBs, and the Sinarindo category covers many kinds of items. homeX analysis, not data: these figures are only useful for a rough sense of company scale, not market share or available stock.

Choosing switches and MCBs for a home: check the certificates

The APPI profiles list SNI and LMK certification for Broco and LMK for Sinarindo (as filled in by the members). For home wiring, ask for the datasheet or product certificate, match the MCB rated current to the cable used, and see our articles on switch, socket and MCB prices and installation cost per point.

Buyer tips

Contact the factory first to confirm the address is a plant and serves projects.
Ask for the SNI or LMK certificate of the product to be installed.
Match the MCB current to the cable cross-section.
Compare store prices with factory quotes for project orders.

Request a switch and MCB factories in Indonesia quote for your project

homeX can compare several brands at once and prepare a written quote for projects, renovations or shop stock. Send your needs (brand, size, quantity, location) via WhatsApp +62 821 1818 998, or visit the homeX showroom: Priskilla Tower, 6th floor, Jl. Atang Sanjaya No.21, Benda, Kota Tangerang, Banten 15125. Visit the homeX Showroom.

Disclaimer: prices change without notice and differ by store, city, pack size, grade and promotion. Data as of 23 October 2026; always confirm with the seller before buying.

FAQ

Where is Schneider’s MCB factory in Indonesia? The APPI profile gives the MCB factory at Batamindo Industrial Estate, Jl. Beringin Lot 4, Muka Kuning, BIP-Batam, although the history on the same page mentions a new MCB plant in Cibitung (2011). Confirm with the company.

Where is the Broco factory? The APPI profile gives Jl. Siliwangi KM. 0.5, Desa Keroncong, Jatiuwung, Tangerang 15134 as the factory address.

Can the factory capacities be compared? Not directly: the units differ (units, pcs, poles, sets) and were filled in by the APPI members themselves.